• Full rigid deck (Payol)
• Slatted deck
• Inflatable flooring
• RIB (rigid inflatable boat)
• Different

• RIB 300
• RIB 320
• RIB 400
• RIB 750
• RIB 360
• RIB 500
• RIB 430

• 
• 
• 
• 
• 
• 
• 
• 
• 

Description:

RIB MARE R75 is speedy seaworthy versatile lightweight boat. Feature of RIB boats of MARE R75 type is the presence of an inflatable balloon, which borders the perimeter of boats. This design provides high safety of navigation because of the high stability of the boat. At the same time, fibreglass hull, due to hull on the bottom and redans, has excellent seaworthiness. Installation of the filling and draining of the ballast tanks in the bow of the body increases the comfort of movement, affecting the softness and stability. The high stability of the boat RIB MARE R75 is reached due to a relatively low centre of gravity of the vessel, as well as increased waterline area (while parking or low speed balloon is supported with water).While planning balloon does not touch the water, thus providing a low wetted surface and, consequently, a sharp decrease of resistance. A small parking area at the side makes it easy to lift out of the water objects and divers. Double rubbing moulding on balloons around the perimeter of boats at all speeds is well protected from splashes. Inflatable balloons, divided into six sections, protect the body of the boat from damage under all conditions. It protects the body during collisions with floating objects, as well as the mooring to the quays and bars with no special fenders. In addition, the cylinders can pull the boat close to the pier, which improves the safety of landing, the landing of passengers. The boats RIB MARE R75 can seat 12 people. High stability is important for passengers who do not have much experience of water travel for comfortable movement (for tourist excursions, while rescue and diving operations, water, transportation, etc.). In addition to resistance to flooding, in any conditions of boat loading and the height of wave, inflatable cylinders provide small angles of heel, which creates the passengers comfort and confidence in their own security. The moderate weight of the boat allows to remove it easily from the water on a trailer along the slip and when deflated, balloons don’t overhang of the trailer sizes. Fibreglass sealed enclosure with internal power and a powerful set of longitudinal keel, has a high-speed sea-going contours. High-duty inflatable boards are glued to the body as tool trays on the outside and from the deck. Built-in ballast tank in the bow of the hull (380l.), divided into three separate compartments and equipped with two pumps controlled by a steering console, in a short time ensures proper alignment of the boat depending on the load and the nature of waves. The boat has a self-draining deck which is above the waterline, even when fully loaded and filled with fuel and ballast tanks. The bow of the boat below the waterline is filled with polyurethane foam that provides increased rigidity and prevents water from entering the body, even in case of severe damage (through breakdown). All communications and wiring are in a special tunnel under the deck and do not clutter up the deck space. Self-draining anchor locker is equipped with stainless tube insertion, locking securely grapnel at any overload (jump)