1. Housing winch
Housing winches, as well as all mounting brackets , made of solid steel.
2 . Winch mechanism
Winch mechanism consists of a gear mechanism gated svobonogo reset mechanism and the armature coil winding anchor line.
Winch mechanism consists of a gear mechanism gated svobonogo reset mechanism and the armature coil winding anchor line.
3. Electric equipment
A 12 V motor is used as a part of the winch electric equipment. Non-locking three-position dump-proof knob is installed on the cover. Wire of 5 m long for winch connection is included into the winch set as well as a thermal safety relay.
A 12 V motor is used as a part of the winch electric equipment. Non-locking three-position dump-proof knob is installed on the cover. Wire of 5 m long for winch connection is included into the winch set as well as a thermal safety relay.
4. Winch cover
The lid of winch is executed from a durable plastic. On the lid of winch the management button is located by a winch.
The lid of winch is executed from a durable plastic. On the lid of winch the management button is located by a winch.
5. Roller
Winch cover is made from stainless steel and contains a control knob.
Winch cover is made from stainless steel and contains a control knob.
6. Anchor rope
Nylon rope winch is provided with a diameter of 3.5 mm and a length of 30 m and a tensile force of 360 kg.
Nylon rope winch is provided with a diameter of 3.5 mm and a length of 30 m and a tensile force of 360 kg.
7. Fastening
The winch mounting kit supplied galvanized bolts and nuts for mounting the winch housing and the roller, and the screws for mounting on an inflatable boat.
The winch mounting kit supplied galvanized bolts and nuts for mounting the winch housing and the roller, and the screws for mounting on an inflatable boat.
8. Packing
Winch and mounting on an inflatable boat packed in a sturdy cardboard shipping.
9. Universal mounting to inflatable boat
Anchor windlass is made of solid steel 2 mm thick. The mount can adjust based on the diameter of the balloon inflatable boat. Mounting is made in two versions: 1. Fixing considering mounting a regular pen, to move the boat placed on her nose. 2. Fixing including installation mounting on the boat with 2 goals. Fixing a zinc coating.
Anchor windlass is made of solid steel 2 mm thick. The mount can adjust based on the diameter of the balloon inflatable boat. Mounting is made in two versions: 1. Fixing considering mounting a regular pen, to move the boat placed on her nose. 2. Fixing including installation mounting on the boat with 2 goals. Fixing a zinc coating.
Specifications
| Maximum anchor weight | 8 kg |
| Boat length, up to | 4m |
| Anchor rope |
∅ 3,5 mm, length 30 m
|
| Attaching to an inflatable boat | there is |
| Control button | there is |
| Function buttons | ascent / descent |
| The connection cable to the battery | there is |
| Free discharge armature | there is |
| The rate of rise of the armature |
20 m/min
|
| The weight | 9kg |
| Winch Dimensions |
250,5 х 260,5 х 130 mm
|
| Dimensions of mounting a inflatable boat |
408x160x50 mm
|
